Tesla puts transformer, inverter and breaker in one 9 MVA box
The Powercore platform is quoted at 98.86 percent peak efficiency, and Tesla says the first units will run in 2027.
By Letizia Giugliano
3 min read

Tesla unveiled Powercore on 17 November 2026: a medium-voltage unit that puts a transformer, an inverter and a circuit breaker inside one enclosure. The company quotes a peak efficiency of 98.86 percent and 7.4 megawatts of continuous output. Tesla plans to build the platform in the United States, with the first units operating in 2027.
Three pieces of grid equipment in one enclosure
Powercore converts electricity between medium-voltage alternating current and low-voltage direct current. Its AC range runs from 10 to 34.5 kilovolts; the DC side covers 800 to 2,000 volts. In its standard setup it delivers 9 MVA, which Tesla equates to 7.4 megawatts continuously, and a grid-forming configuration reaches 10 MVA at peak.
Conventional installations buy those three functions as separate pieces of equipment, each on its own footprint. Tesla's pitch is that one enclosure cuts conversion losses and simplifies the electrical infrastructure behind data centers, battery parks and utility-scale solar farms. The company offers warranties of up to 25 years and availability guarantees of at least 99.9 percent.
Read also on The Patent: A concentrated solar power system designed with its own fuel backup · Perovskite Solar Cells Endure 1,000 Hours of Extreme Heat and Moisture
Tesla announced the platform on its Megapack account on X on 17 November, as first reported by Interesting Engineering.
A breaker that clears faults 1,000 times faster
Inside the enclosure sits a solid-state circuit breaker. Tesla says it clears electrical faults up to 1,000 times faster than conventional breakers, which limits damage and protects equipment downstream.
The design also removes the flammable insulating oil used in conventional transformers. It is modular: a technician can replace one component instead of the whole unit. Tesla puts product-level availability at up to 99.7 percent.
Data centers that take 800 volts of direct current
Most data centers receive power at 415 to 480 volts AC and convert it several times before it reaches the racks. The industry is moving toward 800-volt DC architectures, and Powercore can turn medium-voltage AC straight into 800 volts DC. Fewer conversion stages mean less equipment inside the building.
Tesla says the lower losses could let operators run more GPUs on the same grid connection, and that it is working with Nvidia on engineering for 800-volt DC power designs. Megapack batteries can connect directly to the DC bus, providing backup and smoothing swings in demand. Tesla estimates that a 100-megawatt data center could be supplied by 500 megawatts of solar capacity and 1.7 gigawatt-hours of energy storage.
Solar arrays, batteries and a missing production date
On the solar side, Powercore accepts 1,500-volt DC arrays and the emerging 2,000-volt systems, and converts their output directly to medium-voltage AC. Transformer shortages have delayed installations and inverter failures cost generation, so packing both functions into one unit addresses two known bottlenecks for renewable energy developers.
Battery projects change too. A conventional Megapack installation uses two conversion stages between the battery and the grid. Powercore brings that to one, which Tesla says can improve efficiency and energy output.
Manufacturing will be in the United States. Tesla reports 140 GWh of annual Megapack capacity, 90 GWh of it from plants in California, Texas and Nevada.
No patent named, no price, one date: 2027
The announcement named no patent, patent application or filing behind the design, and gave no production start date or price. That leaves the intellectual-property position of the platform, and the share of the claimed efficiency that comes from the solid-state components rather than from the single-enclosure layout, outside what the company has disclosed so far.
The dated commitment is deployment: first units in operation in 2027. The 98.86 percent figure, the fault-clearing speed and the availability guarantees will be tested there, on real grids, rather than in a specification sheet.
AI-assisted article



