Coffee grounds give up their oil in 60 minutes, Spanish chemists report
The Universitat Rovira i Virgili method recovers about 90% of the oil that a standard lab technique would get, with 0.3% impurities instead of 3.9%, and leaves the leftover biomass ready for a second use
By Giovanni Sapere
3 min read

Chemists at the Universitat Rovira i Virgili (URV) have found a simple set of conditions to pull oil out of spent coffee grounds: 45 °C for 60 minutes, with 35 milliliters of solvent per gram of dry residue. The oil can go into biodiesel, and the grounds that remain keep their structure for other products. The team, led by researchers in the university's chemical engineering department, published the method in Biomass and Bioenergy, as ScienceDaily reports.
Ten million tons of beans, and a lot of leftovers
Global coffee bean production reaches roughly 10 million metric tons a year, but only a small part of each bean ends up in the cup. The rest is thrown away as solid waste. That waste still carries about 15% lipids, fats that can be turned into biodiesel, according to the study reported by ScienceDaily.
The URV group tested three variables on the spent grounds: extraction temperature, how long the solvent works, and how much solvent is used. The solvent was n-hexane, a liquid widely used in industry to separate fats from other material. Jorge F. Romero, Alberto Tampieri, Daniel Montané, Magdalena Constantí and Francesc Medina carried out the work in the Department of Chemical Engineering.
Read also on The Patent: Sticky marine snow carries six times more carbon to the ocean floor · UNSW researchers track persistent chemicals in farmland sewage fertilizer
Photo: Luca Albrecht / Unsplash
“In our study, we also demonstrate that extracting the oil does not mean that the rest of the material cannot be used for something else.”
— Francesc Medina, Department of Chemical Engineering, Universitat Rovira i Virgili
45 °C, 60 minutes, 35 milliliters per gram
The best combination turned out to be modest rather than extreme. "We have found that the optimal conditions are at 45 °C for 60 minutes with a ratio of 35 milliliters of hexane per gram of dry residue," Constantí said, in comments reported by ScienceDaily.
Under those conditions the researchers recovered about 90% of the oil that Soxhlet extraction, a standard laboratory method known for high yields, would obtain. Soxhlet works, but it takes longer, uses more energy and fits awkwardly into large industrial plants. The URV route also produced cleaner oil: 0.3% impurities against 3.9% for Soxhlet. Chemical analysis found the same fatty acid profile across the experimental conditions, with linoleic and palmitic acids the most abundant, a composition that supports use in biodiesel.
The residue is the other half of the value
Stripping the oil does not ruin what is left, the researchers say. "In our study, we also demonstrate that extracting the oil does not mean that the rest of the material cannot be used for something else," said Francesc Medina, of the Department of Chemical Engineering, in comments reported by ScienceDaily.
The target was the lignocellulosic matrix, the structural part of the grounds made of cellulose, hemicellulose and lignin. That material can be processed into bioethanol, lactic acid, polyhydroxyalkanoates, phenolic compounds and ingredients for sustainable aviation fuels. Removing the fats may even help: they form a barrier that keeps solvents and catalysts away from the other components, so oil-free grounds can be easier to process.
Ultrasound and microwaves lost on balance
The team also tried faster routes, including ultrasound and microwave-assisted extraction. Both can speed up the early stages, but neither gave a clear enough overall gain once oil purity, extraction efficiency, energy demand and the prospect of scaling up were weighed together. The conventional batch process with n-hexane at moderate temperature came out as the more balanced option, the kind of method that could fit into a biorefinery, a plant that converts biological material into fuels and chemicals. The work feeds the argument for a circular economy in sectors that are hard to electrify, heavy transport in particular, according to ScienceDaily.
What the paper protects, and what it does not
The findings appeared in Biomass and Bioenergy, and that peer-reviewed article is the route the team used to disclose the method; the source describes no patent application, no granted patent and no licensing deal around the extraction conditions. The value documented so far lies in the numbers: a 60-minute batch at 45 °C, 0.3% impurities, roughly 90% of the Soxhlet yield, and a residue left intact for a second process.
Whether the conditions can hold at industrial scale is the next question. The report, dated 14 November 2026, presents laboratory experiments and an assessment of scale-up, not a working refinery.
AI-assisted article



