Introduction
Most people wash their hands as a measure of hygiene and disease prevention, and especially they do so frequently nowadays because of the COVID-19 pandemic. This new virus is spread through respiratory droplets from an infected person to others with whom they are in close contact, such as people living together or providing care. The virus can survive on a variety of surfaces, but most cleaning and disinfecting products can destroy it.
It is important to remember the importance of effective and prompt cleaning and disinfection of hands, including objects touched by people’s hands, to prevent the spread of contagious diseases. For this reason, devices and systems based on different methods have been developed to clean hands as well as objects. However, these cleaning devices and systems developed so far do not allow cleaning and disinfection of users’ hands at the same time and simultaneously, in a safe, reliable and effective manner. In the patent “US20090020135A1”, the inventors present one cleaning device, method and system of cleaning are all combined. It is based on a housing that contains a sprayer and a product dispenser, which are associated and communicate with each other. In the patent “US8481970B2”, a disinfection device for portable electronic devices is proposed. This device has a cavity to receive the electronic device to be disinfected. This cavity is equipped with a lid and a UV source. The open position of the cover allows the device to be inserted into or removed from the cavity. The closed position of the cover is used during the UV exposure phase. However, these decontamination devices and systems are vulnerable because the user can touch the external parts of these sterilization instruments which may be contaminated, and also because these systems are not portable or completely autonomous. For this purpose, a disinfection device is proposed.
Thus, it was needed to design a portable and lightweight device that provides an automatic, integrated and autonomous cleaning and disinfection of hands and/or objects every time users touch them. This helps to reduce the spread of disease or pandemics, while promoting sterile and clean health environments. The proposed concept concerns a device for cleaning and disinfecting hands and objects touched by the user. It is composed of a wristband that can be worn on the wrist, an ultraviolet source with a very large degree of liberty, in order to embrace the whole environment to be disinfected where the touch is accomplished, finally this wristband will be equipped with a system of production of electrical energy by the movement of the hands of its wearer. The device will be fitted with an electronic control system fully integrated in the UV emitting head, which increases or decreases the intensity of UV radiation and the duration of this radiation emission on the user’s hands and also manages the power supply of the UV lamp. It should be mentioned that the proposed concept is registered as patent application at OMPIC (Office marocain de la propriété industrielle et commerciale) under the following number: MA49542 by Badre El Majid, Saad Motahhir, Aboubkar El Hmmoumi, Ambar Lebbadi and Abdelaziz El Ghzizal. Moreover, a research paper has been published in inventions journal. Also, this invention earned a gold medal in the international “Inventions Vs Corona” competition as depicted below:
Design concept
The concept of the proposed scheme is illustrated in Figures 1, 2 and 3. The device is a system for disinfecting hands and the objects they touch, as shown in Figure 1, and consists of a wristband that is placed around the wrist of the user’s hand. It is equipped with an intelligent electronic system that emits UV rays directly on the palm of the hand and on the object in front of it.
The wristband is composed of one or more adjacent coils forming a cylinder, each coil being empty on the inside to allow the free movement of the magnetic balls, solar cells are arranged on the outside of these coils. The UV emitting head consists of a UV lamp embedded in a shell, the shell incorporates an electronic circuit and a battery, an external power port being attached to the shell.
The orientation of the UV emitter, its intensity and exposure time are adjustable and controlled by the intelligent electronic system that allows UV radiation to be emitted in any direction. Manual control and on/off buttons will be added. In order to distribute the UV radiation over the whole of the user’s hand and to allow a wide diffusion of these rays on the hands and any object in front of them, we opt for an oval-shaped opening curved outwards, like an eye in front of the UV lamp.
Although powering this system with a small battery seems simpler, we prefer to give this system independence from its electrical energy consumption. To this end, we propose in this invention the following power supply techniques:
- Using the electrical energy generated by the movement of the user’s hands, the basic principle of which is illustrated in figure 2. Indeed, when a magnetic ball placed inside the coil moves thanks to the movement of the hands (when the user rubs or slaps his hands), an induced current is generated in the circuit which then charges a capacitor which, in turn, discharges, this electrical voltage supplies the UV emitter to be emitted as UV radiation through the small UV lamp. The power can be increased by placing several adjacent coils. With this solution, the UV lamp will be directly supplied with the generated energy.
- Equipping the system with small solar cells and a battery to store this energy, the behavior will be the same with small solar cells as shown in figure 3.
- Equip the system with a port for charging at a power outlet and a battery to store this energy, the behavior will be the same with small solar cells as shown in Figure 3.
The UV emission system will be programmed to automatically shut off after a given time in order to protect the user’s skin and comply with safety standards. Certain wavelengths of ultraviolet light have the ability to inactivate microorganisms, like fungi and viruses, by damaging their DNA or RNA so that they can no longer reproduce.
In addition, the wristband can include as an option a watch to enhance its design and ergonomics. This hand sanitizer wristband is not only convenient to use but also fashionable
Challenges
Based on the promising first research results aimed at developing the concept of the innovative disinfection system presented in this short research reports, work is currently underway to improve various aspects and ensure the safety of people during use. This work includes in particular:
- Build mock-up of the UV-emitting head in order to cover the largest surface area of the palm of the user’s hand without disturbing the normal articulation of his hands.
- Test all the different approaches to electricity supply, which have been presented earlier in this short research reports.
- Test of many UV lamps to identify the most suitable with our system, in a reduced energy consumption with an adapted radiator.
- Determine the optimal dimensions and materials for the wristband.
- Determine the optimal duration and frequency of disinfection to protect the user’s skin and meet safety standards.
- make a comparison with existing disinfection systems and our proposal concept, in terms of their level of efficiency, cost and durability.
- Keep costs as low as possible to ensure that the final product will be accessible to the low-income country.
Conclusion
The following conclusions can be drawn from the current proposal:
- We open up an attractive opportunity to develop new solutions for UV disinfection systems.
- Our proposal has two major advantages; firstly, it will allow direct disinfection of the palms of the user’s hands that are in permanent contact with objects contaminated by microbes or viruses and this, at any time and according to the user’s request. Secondly, at the same time, we will disinfect all objects that are susceptible to being touched by the user, as the UV rays will be sent to these objects.
- The movement power supply system can be used for other applications such as a phone charger.
The epidemic crisis related to COVID’19 has a significant impact stimulating the development of innovative solutions. And it is important to get this product out as quickly as possible. Our goal is to provide a new, low-cost solution that can effectively contribute to addressing today’s sanitary challenge.
Author: Badre El majid (Independent Scientist, Rabat, Morocco)